Double-sided labeling machine is suitable for round bottles, square bottles, oval bottles, hexagonal bottles and other heterogeneous bottles can be customized.
Double side labeling, such as lubricating oil flat bottle, hand sanitizer round bottle and other double side labeling, are widely used in daily chemical, beverage, mineral water, cosmetics, petrochemical, pharmaceutical and other industries.
Structural features of the double-sided labeling machine: PLC integrated control, the sensor detects the passing of the product, sends a signal back to the labeling control system, and the control system controls the sending of the label at the appropriate position and attaches it to the position where the product is to be labelled. The product flows through Label covering device, the label is covered and attached to the product.
The working principle of the double-sided labeling machine: put different packaging objects into the conveyor belt of the labeling machine, and the conveyor belt drives the bottles into the bottle separation area.
After the bottles are detected by the optical fiber, the photoelectric signal is transmitted to the PLC, which is processed by the PLC. Then the output signal is input to the stepper motor, and the label is attached to the sub through the rolling mechanism. So, how should the double-sided labeling machine encounter uneven labeling during operation?
1. Reasons for the application environment of double-sided labeling machine machinery and equipment
1. Due to the humid application environment and high temperature work for a long time, the header is loose and the labeling is inaccurate. Solution The mechanical equipment should work at room temperature and fix the header to adjust the coordinates. In order to avoid shaking, the equipment is carried out in an orderly manner.
2. Electrical reasons for double-sided labeling machine - including power and detection
1. The common ones are: the transmission does not rotate or rotates randomly, you can check the fastening and rotating accessories to solve the problem, and the double-sided labeling machine operates normally
2. It is not accurate to stop the watch, the solution: reset the parameters of the measuring electric eye, and proceed safely after the labeling machine is stopped.
3. The measuring object is not accurate, the solution: adjust the measuring object electric eye and amplifier to make it accurate and neat.
Contact Person: Ms. Wei
Tel: 86-15372434551
Fax: 86-571-88615836